Introduction
    • 04 Aug 2022
    • 1 Minute to read
    • Dark
      Light

    Introduction

    • Dark
      Light

    Article Summary

    The 1D Model Health Checker is designed to help modellers and auditors find and fix data consistency errors within models. The Health Checker only carries out consistency checks on the data within the model and does not try to see if the data within the model is valid for the purpose it is being used for. The Health Check does not make any judgements about the style of model, physical representation, etc. Therefore it is possible to have a very consistent model that for all intents and purposes is not representative of the physical system being modelled.

    However, use of this utility will assist in removing common modelling errors and may help in making models run faster, and with better convergence. The Health Checker also incorporates some automatic and user assisted error fixing which allows the model user to fix common modelling problems.

    This section consists of the following topics:

    How to use the Health Checker

    Profiles

    Checks

    Check Descriptions - Sections

    Check Descriptions - Spills

    Check Descriptions - Structures

    Check Descriptions - Boundaries

    Check Descriptions - GIS / Floodmapping

    Automatic model fixing


    Was this article helpful?

    Changing your password will log you out immediately. Use the new password to log back in.
    First name must have atleast 2 characters. Numbers and special characters are not allowed.
    Last name must have atleast 1 characters. Numbers and special characters are not allowed.
    Enter a valid email
    Enter a valid password
    Your profile has been successfully updated.