The 1D river results extractor
    • 04 Aug 2022
    • 1 Minute to read
    • Dark
      Light

    The 1D river results extractor

    • Dark
      Light

    Article Summary

    The 1D Model Result extractor is a tool that can extract, collate, check and plot multiple 1D model results files from the same base data. The Result Extractor works directly with .ZZN results files and model .DAT files. This enables the user to extract model results across different return periods, storm durations and different hydraulic model runs. Basic checks can be carried out to ensure that the results are valid. Results are pre-formatted for report tables with additional data drawn from the hydraulic model (e.g. bank elevations, GIS locations). Ordered longitudinal profile data can also be prepared. An audit trail of model runs and associated results files is automatically created when the program is run.

    Program settings can be saved and loaded to and from Result Extractor Profile files (*.IHP).

    This section consists of the following:

    How to load results files

    Results extractor output sheets

    How to extract time series and long section graphs

    Results extractor assumptions and limitations


    Was this article helpful?

    Changing your password will log you out immediately. Use the new password to log back in.
    First name must have atleast 2 characters. Numbers and special characters are not allowed.
    Last name must have atleast 1 characters. Numbers and special characters are not allowed.
    Enter a valid email
    Enter a valid password
    Your profile has been successfully updated.