Run batch simulations with post-processing
    • 04 Aug 2022
    • 1 Minute to read

    Run batch simulations with post-processing


    Article summary

    Post-processing tasks within the batch runner are optional for a batch of simulations. If post-processing tasks are defined then they can be run in conjunction with simulations by ticking the box next to the run simulations button – in the toolbar, as shown below:

    BatchRunnerassetsimagespp3.PNG

    Alternatively, post-processing tasks can be run in isolation from any simulations, i.e. processing data from simulations already run. To do this, first add the completed simulations to a batch and specify the required post-processing tasks.Then click the Run button in the post-processing section of the batch runner toolbar, as shown below:

    BatchRunnerassetsimagespp4.PNG

    Note the batch runner tool will display progress through the requested post-processing tasks just as it does for simulations.


    Was this article helpful?

    Changing your password will log you out immediately. Use the new password to log back in.
    First name must have atleast 2 characters. Numbers and special characters are not allowed.
    Last name must have atleast 1 characters. Numbers and special characters are not allowed.
    Enter a valid email
    Enter a valid password
    Your profile has been successfully updated.
    ESC

    Eddy AI, facilitating knowledge discovery through conversational intelligence