Login
      Contents x
      2D Simulations
      • 21 Jun 2023
      • 1 Minute to read
      • Print
      Contents

      2D Simulations

      • Updated on 21 Jun 2023
      • 1 Minute to read
      • Print
      Article summary

      When your 2D modelling domains and boundaries (and any additional structures and features) have been prepared, you are ready to start a 2D simulation.

      Flood Modeller provides functionality to start a new simulation and also to load a simulation.

      When setting up 2D simulations, the timing and simulation type must be provided, alongside the domain and boundary details. This is all done when you configure the simulation window.

      Although other tabs on the 2D simulation window can be left at the default settings, Flood Modeller provides the option to adjust these as suits your needs. This includes selecting the parameters output from your simulation, and selecting the solver to be used, including the GPU solver to run simulations faster than ever.

      Once everything is setup, there are several options provided to run the simulation.

      Was this article helpful?
      What's Next
      Change password!
      Changing your password will log you out immediately. Use the new password to log back in.
      Change profile
      Success!
      First name must have atleast 2 characters. Numbers and special characters are not allowed.
      Last name must have atleast 1 characters. Numbers and special characters are not allowed.
      Enter a valid email
      Enter a valid password
      Your profile has been successfully updated.
      Logout
      ESC

      Eddy AI, facilitating knowledge discovery through conversational intelligence