Urban settings - general tab
- 05 Aug 2022
- 1 Minute to read
- Print
Urban settings - general tab
- Updated on 05 Aug 2022
- 1 Minute to read
- Print
Article summary
Did you find this summary helpful?
Thank you for your feedback
In the General tab of the urban Model Settings window, models and routing options to be used are specified.
Process models
The processes to be used are shown here. If your current network does not have certain processes currently defined, they will be greyed out.
Routing model
The routing model to be used is selected. Certain network configurations are only suitable for Dynamic wave routing, and this routing type should always be selected if integrating your 1D urban network with 1D river networks and/or 2D components.
Infiltration model
The infiltration model to be used is selected. Adjusting the infiltration method will then require adjusting the parameters in your Subcatchment nodes accordingly.
Allow Ponding
This checkbox enables water that leaves the system via Junction nodes to pond, and subsequently re-enter if conditions allow. A ponded area will also need to be defined in the associated Junction nodes.
Was this article helpful?