Setting up a 1D river simulation - how to specify additional outputs

Note: to follow this guide, a 1D river simulation must be loaded and active. You must therefore initially Start a new 1D river simulation or Load a 1D river simulation.

The Additional Output tab of the 1D simulation window provides additional variables to add to your 1D results file.

This tab is not shown by default. In the 1D simulation window, click View > Tabs > Output Variables to access this tab. Check the boxes provided next to variables you would like to output.

Options are also provided to output a Detailed volume output or a Summary volume output, or both. If system volume is desired, the Volume Output Interval (in seconds) should be entered into the field provided.

Related topics

More about 1D River Simulations