How to configure the Dynamic Wave tab to set urban Model Settings
    • 03 Aug 2022
    • 1 Minute to read

    How to configure the Dynamic Wave tab to set urban Model Settings


    Article summary

    In the Dynamic Wave tab of the urban Model Settings window, details of certain calculations within Dynamic Wave routing are specified. This tab will rarely need to be used, aside from for the Variable Timesteps checkbox, which is particularly important if integrating your urban network with river networks and/or 2D components.

    1DUrbanimagessettingsDWtab.PNG

    The Calculation Specifications are specified here; a user can select a Force Main Equation from either the Hazen-Williams or Darcy-Weisbach formulae to compute friction losses for pressurised flow. We refer the reader to the section of the technical reference for further details.

    The Variable Timesteps checkbox will be checked by default. This needs to be unchecked if integrating your urban network with river networks and/or 2D components.


    Was this article helpful?

    Changing your password will log you out immediately. Use the new password to log back in.
    First name must have atleast 2 characters. Numbers and special characters are not allowed.
    Last name must have atleast 1 characters. Numbers and special characters are not allowed.
    Enter a valid email
    Enter a valid password
    Your profile has been successfully updated.
    ESC

    Eddy AI, facilitating knowledge discovery through conversational intelligence