Login
      Contents x
      Mapping component failure
      • 07 Aug 2024
      • 1 Minute to read
      • Print
      Contents

      Mapping component failure

      • Updated on 07 Aug 2024
      • 1 Minute to read
      • Print
      Article summary

      On some systems, you may experience an issue when you first try to start Flood Modeller due to a failure within a third-party mapping component.

      If you open Flood Modeller and receive the following error message, please follow the steps below to resolve the issue.

      To resolve the issue:

      1. Browse to the Flood Modeller\gui folder. By default, this is C:\Program Files\Flood Modeller\gui
      2. Locate the file regMapWinGIS.cmd in this folder, right-click on the file and select Run as Administrator from the displayed menu
      3. A Command Prompt window displays progress as the program runs. Upon completion of the program the window will close automatically
      4. Double-click the Flood Modeller shortcut (or the executable) to open the software.
      Was this article helpful?
      What's Next
      Change password!
      Changing your password will log you out immediately. Use the new password to log back in.
      Change profile
      Success!
      First name must have atleast 2 characters. Numbers and special characters are not allowed.
      Last name must have atleast 1 characters. Numbers and special characters are not allowed.
      Enter a valid email
      Enter a valid password
      Your profile has been successfully updated.
      Logout
      ESC

      Eddy AI, facilitating knowledge discovery through conversational intelligence