Login
      Contents x
      How to validate simulations in the river simulation builder
      • 27 Jul 2022
      • 1 Minute to read
      • Print
      Contents

      How to validate simulations in the river simulation builder

      • Updated on 27 Jul 2022
      • 1 Minute to read
      • Print
      Article summary

      Validation checking is built into the Simulation Builder tool to check you can produce simulations based on the input information provided for each new IEF file.

      When the Build button is pressed, a validation check is undertaken to ensure that all the prerequisite files referenced are present such as the Network and Event data files. If some or all of these are not present, you will be prompted to load them:
      SimulationBuilderimagessimbuildvalidation1.png

      Furthermore, if you have previously associated the Simulation Builder to a Flood Modeller Project file, the tool will prompt you with the Project file name, as shown here:
      SimulationBuilderimagessimbuildvalidation2.png

      Was this article helpful?
      What's Next
      Change password!
      Changing your password will log you out immediately. Use the new password to log back in.
      Change profile
      Success!
      First name must have atleast 2 characters. Numbers and special characters are not allowed.
      Last name must have atleast 1 characters. Numbers and special characters are not allowed.
      Enter a valid email
      Enter a valid password
      Your profile has been successfully updated.
      Logout
      ESC

      Eddy AI, facilitating knowledge discovery through conversational intelligence