Setting up a 1D river simulation - how to specify additional outputs
    • 03 Aug 2022
    • 1 Minute to read

    Setting up a 1D river simulation - how to specify additional outputs


    Article summary

    Note: to follow this guide, a 1D river simulation must be loaded and active. You must therefore initially Start a new 1D river simulation or Load a 1D river simulation.

    The Additional Output tab of the 1D simulation window provides additional variables to add to your 1D results file.

    This tab is not shown by default. In the 1D simulation window, click View > Tabs > Output Variables to access this tab. Check the boxes provided next to variables you would like to output.

    1DRiverimages1dsimaddoutputstab.PNG

    Options are also provided to output a Detailed volume output or a Summary volume output, or both. If system volume is desired, the Volume Output Interval (in seconds) should be entered into the field provided.

    More about 1D River Simulations


    Was this article helpful?

    Changing your password will log you out immediately. Use the new password to log back in.
    First name must have atleast 2 characters. Numbers and special characters are not allowed.
    Last name must have atleast 1 characters. Numbers and special characters are not allowed.
    Enter a valid email
    Enter a valid password
    Your profile has been successfully updated.
    ESC

    Eddy AI, facilitating knowledge discovery through conversational intelligence