How to save simulation summary output data
    • 04 Aug 2022
    • 1 Minute to read

    How to save simulation summary output data


    Article summary

    At simulation runtime, a variety of information is displayed, including parameters and multiple graphs. This summary data can also be saved so you can refer to it after the simulation has completed.

    To save and view simulation summary outputs:

    1. On the Home tab, click General.

    2. The Application Settings will open in a new window.

    3. On the Project Settings tab, check the box to Save simulation summary files

    4. Click Apply, and then OK in the pop-up that appears. Then close the Application Settings window.

    5. Run a simulation in the normal manner and wait until this has completed. This can be a 1D river, 1D urban, 2D, or integrated simulation.

    6. Navigate to the folder containing the simulation and locate the Excel file with the same name as the simulation.

    7. Open this file in Excel to review the outputs that were displayed at simulation runtime.


    Was this article helpful?

    Changing your password will log you out immediately. Use the new password to log back in.
    First name must have atleast 2 characters. Numbers and special characters are not allowed.
    Last name must have atleast 1 characters. Numbers and special characters are not allowed.
    Enter a valid email
    Enter a valid password
    Your profile has been successfully updated.
    ESC

    Eddy AI, facilitating knowledge discovery through conversational intelligence