---
title: "Output shear stress from a  2D simulation"
slug: "how-to-output-shear-stress-from-a-2d-simulation"
description: "Watch the video on how to output shear stress from a 2D simulation. "
tags: ["running simulations", "2D modelling", "wind shear"]
updated: 2022-08-04T07:23:10Z
published: 2022-08-04T07:23:10Z
canonical: "help.floodmodeller.com/how-to-output-shear-stress-from-a-2d-simulation"
stale: true
---

> ## Documentation Index
> Fetch the complete documentation index at: https://help.floodmodeller.com/llms.txt
> Use this file to discover all available pages before exploring further.

# Output shear stress from a  2D simulation

Alongside options to output parameters such as flow, velocity and depth from your 2D simulations, Flood Modeller provides functionality for additional shear stress outputs.

To output shear stress from a 2D simulation:

 1. Open the simulation in the usual manner


 3. Navigate to the **Domains**	  tab, and then to the **Outputs**	  subtab
 4. On the right-hand side, the available outputs are listed. Check the box(es) of the additional shear stress outputs of interest. These include Bed shear stress, Excess shear stress, Shields parameter and Stream competence.
 5. Click on the **Shear stress settings**	  tab
 6. Enter values for all the parameters. You can press the F1 key to view the user manual and check which parameters are used in the calculations for each output. Parameters not used in the calculations will be ignored, but must still be entered.
 7. Click **Save**	  to store your changes.
 8. Click **Run**	  to run the simulation and visualise your newly calculated shear stress outputs.

<iframe width="672" height="378" src="https://www.youtube.com/embed/P_Gr13vNp3o" title="YouTube video player" frameborder="0" allow="accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture" allowfullscreen=""></iframe>