Adsorbed Phosphorus Data Fields
    • 05 Aug 2022
    • 1 Minute to read

    Adsorbed Phosphorus Data Fields


    Article summary

    Data Input

    In order to input the required information for this pollutant into the Water Quality model, the user needs to make sure that the Tab Adsorbed Phosphorous appears in the WQ General Tab (please follow the description on the page Preparing a Water Quality Datafile for this). Then the user needs to select the Tab Adsorded Phosphorous and type in the necessary information for this pollutant in the fields which are shown on this Tab. Alternatively the necessary information for this pollutant can be typed in the .con file opened in a Textpad editor in the datafile format mentioned below.

    Datafile Format

    Line 1     ADSORBED PHOSPHORUS

    Line 2     phk, alphap, phmax, adlan (4f10.0)

    Where:

    ADSORBED PHOSPHORUS = keyword

    Phk=         Adsorption rate at 20C (day-1)

    Alphap=    temperature dependence factor

    Phmax=     saturation adsorption ratio of phosphate to mud

    adlan=        half-saturation constant for Langmuir isotherm (mg/l).


    Overview
    Adsorbed Phosphorus


    Was this article helpful?

    What's Next
    Changing your password will log you out immediately. Use the new password to log back in.
    First name must have atleast 2 characters. Numbers and special characters are not allowed.
    Last name must have atleast 1 characters. Numbers and special characters are not allowed.
    Enter a valid email
    Enter a valid password
    Your profile has been successfully updated.
    ESC

    Eddy AI, facilitating knowledge discovery through conversational intelligence